23
(3) Close the printer cover with the end of the paper taken out a little.
At this time, close it completely until hearing the clicking noise. The error is displayed and
the data is not printed out if the cover is opened.
5.5 Replacement of Fuse
Warning
Unplug the power cord before removing the fuse holder at the time of
replacing the fuse.
Electric shock may occur if removing the fuse holder without
When the fuse is brown out, replace it after removing the fuse holder of the power inlet. The
fuse holder is removed from the main unit by pulling it out.
Use the printer paper specified for “ALM700”.
Always use the specified fuse (T2A L 250V).
Printer paper
Fuse
Power inlet
(with fuse holder)
To Next Page
Loading...
Need help?
General
