EVS LSM Connect User Manual

Info Area
Name
The Name field displays the clip name assigned in one of the Multicam user interfaces, or
via the Remote Panel.
Clip ID
The Clip ID field displays by default the LSMID of the clip.
You can also display the other clip identifiers by tapping the field name, which toggles the
ID display between LSMID, VARID and UMID.
Type
The Type field allows users to assign a clip type to the clip by selecting one of the
following type symbols:
Type Symbol Description
Asterisk (*) Symbol used for the preferred camera, that is the primary output
channel at clip creation.
Equals sign (=) Symbol used for the secondary camera, that is the clip that was
loaded on the next output channel at clip creation.
TC (Type)
The TC field allows users to select the timecode type to be displayed on the OSD among
the following types:
Type Symbol Description
LTC Timecode defined on or plugged into the EVS server and stored in the
LTC table in Multicam.
When the LTC timecode is selected, the timecode is displayed in
white in the field below the TC selection.
USER Timecode selected by the user and stored in the User TC table in
Multicam.
When the USER timecode is selected, the timecode is displayed in
yellow in the field below the TC selection.
TC (Value)
The field without label, below the TC field, displays the timecode of the Short IN point of
the clip.
Depending on the TC type selected in the TC field, the LTC timecode (white font) or
USER timecode (yellow font) is displayed.
28 3. Clip Management
EVS Broadcast Equipment SA Issue 2.12.D- April 2020

EVS LSM Connect Specifications

General

Brand	EVS
Model	LSM Connect
Category	Server
Language	English