To Next Page

To Previous Page

Issue

10.05.A

XT2+ Series DISK RECORDER – Version 10.05 - Hardware Technical Reference

EVS Broadcast Equipment SA – July 2011

2.4 MTPC GPIO CONNECTOR 15/10/02

2.4.1 GPIO CONNECTOR: SUB-D 25-PINS MALE

1 Relay Out 4 14 Relay Out 4

2 Relay Out 3 15 Relay Out 3

3 Relay Out 2 16 Relay Out 2

4 Relay Out 1 17 Relay Out 1

5 IN + opto 4 18 IN - opto 4

6 IN + opto 3 19 IN - opto 3

7 IN + opto 2 20 IN - opto 2

8 IN + opto 1 21 IN - opto 1

9 I/O TTL 8 22 GND (Return I/O 8)

10 I/O TTL 7 23 GND (Return I/O 7)

11 I/O TTL 6 24 GND (Return I/O 6)

12 I/O TTL 5 25 GND (Return I/O 5)

13 + 5V 50mA max.

2.4.2 GPIO HARDWARE SPECIFICATION

4 X Relay isolated output:

•

normally open contact (power off -> open)

• maximum 1A

• maximum 50 Volts

• typical life time: 100.000.000 switching

4 X Opto isolated input:

•

The input consists in an opto diode (VF @ 1.1 Volt) in series with a 470 ohm

resistor).

EVS XT2+ User Manual

Questions and Answers: