EVS XT2+ User Manual

XT2+ Series DISK RECORDER - Version 10.05 - Hardware Technical Reference Manual
Issue
10.05.A
EVS Broadcast Equipment SA – July 2011
33
Pin
#
Sub-DB15 #1
Inputs 1-8 (mono)
Sub-DB15 #2
Inputs 9-16 (mono)
Sub-DB15 #3
Outputs 1-8 (mono)
Sub-DB15 #4
Outputs 9-16 (mono)
12
GND
GND
GND
GND
13
AES input 5/6 -
AES input 13/14 -
AES output 5/6 -
AES output 13/14 -
14
GND
GND
GND
GND
15
AES input 7/8 -
AES input 15/16 -
AES output 7/8 -
AES output 15/16 -
Analogue DB15 Connectors
Pin
#
Sub-DB15 #1
Inputs 1-4 (mono)
Sub-DB15 #2
Inputs 5-8 (mono)
Sub-DB15 #3
Outputs 1-4 (mono)
Sub-DB15 #4
Outputs 5-8 (mono)
1
GND
GND
GND
GND
2
Analogue input 1 +
Analogue input 5 +
Analogue output 1 +
Analogue output 5 +
3
GND
GND
GND
GND
4
Analogue input 2 +
Analogue input 6 +
Analogue output 2 +
Analogue output 6 +
5
GND
GND
GND
GND
6
Analogue input 3 +
Analogue input 7 +
Analogue output 3 +
Analogue output 7 +
7
GND
GND
GND
GND
8
Analogue input 4 +
Analogue input 8 +
Analogue output 4 +
Analogue output 8 +
9
Analogue input 1 -
Analogue input 5 -
Analogue output 1 -
Analogue output 5 -
10
GND
GND
GND
GND
11
Analogue input 2 -
Analogue input 6 -
Analogue output 2 -
Analogue output 6 -
12
GND
GND
GND
GND
13
Analogue input 3 -
Analogue input 7 -
Analogue output 3 -
Analogue output 7 -
14
GND
GND
GND
GND
15
Analogue input 4 -
Analogue input 8 -
Analogue output 4 -
Analogue output 8 -
2.7 CONNECTING MULTIPLE EVS VIDEO
SERVERS ON XNET
The XNet network is composed by several EVS video servers all connected with a
75-Ohm coaxial cable (BNC).
The exchange between systems is operated through the SDTI interface at 1485
Mbps.
On XT2+ servers there is one pair of SDTI connectors: XNet2 Non-Relay
connectors that are used at 1485 Mbps.
The SDTI loop is closed only when the Multicam software is started. It is therefore
recommended to use XHub when using Non-Relay connectors to avoid network
interruptions.
The XNet requires a network server dedicated to the management of the Database
shared among all LSM-EVS video servers. This is assigned to one of the LSM-EVS
servers on the network. The EVS server acting as the network server can of
course be used for standard LSM/video server operation.

EVS XT2+ Specifications

General

Brand	EVS
Model	XT2+
Category	Server
Language	English