FLIR T8 Series User Manual

Camera settings
23
• Delete all saved files...: This displays a dialog box where you can choose to perma-
nently delete all the saved files (images and videos) from the memory card or to can-
cel the delete action.
23.5 Device settings
• Language, time & units: This submenu includes settings for a number of regional
parameters:
◦ Language.
◦ Temperature unit.
◦ Distance unit.
◦ Time zone.
◦ Date & time.
• Focus: This submenu includes the following settings:
◦ Autofocus: When autofocusing, the infrared camera can use one of the following
focus methods:
– Contrast: The focus is based on maximizing the image contrast.
– Laser: The focus is based on a laser distance measurement. The laser is on
when the camera is autofocusing.
◦ Continuous autofocus: This setting is used to enable/disable continuous autofocus.
• Display settings: This submenu includes the following settings:
◦ Screen rotation: This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
◦ Image overlay information: This setting specifies what image information the cam-
era will display as an overlay on the image. For more information, see section 6.6.6
Image overlay information. You can select the following information to display:
– Compass.
– Date & time.
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Active display: This setting defines the behavior of the display and viewfinder.
– Auto: The display will automatically turn off when you look into the viewfinder.
– Screen: The display is always on and the viewfinder is always off.
– Viewfinder: The viewfinder is always on and the display is always off.
◦ Screen brightness: This submenu is used to control the brightness of the screen.
– Auto: Enable/disable automatic adjustment of the screen brightness.
– Slider: Manual adjustment of the screen brightness.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 6.6.5 Swipe-down menu.
◦ Viewfinder brightness: This setting defines the brightness of the viewfinder.
• Geolocation: This submenu includes the following settings:
◦ GPS: This setting is used to enable/disable the GPS.
◦ Compass: This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 7.14 Calibrating the compass.
#T810413; r. AF/83467/83910; en-US
95

FLIR T8 Series Specifications

General

Brand	FLIR
Model	T8 Series
Category	Thermographic Cameras
Language	English