FLIR T8 Series User Manual

Handling the camera
7
Note Do not touch the lens surface when you adjust the focus. If this happens, clean
the lens according to the instructions in 24.2 Infrared lens.
7.4.2 Autofocus
To autofocus the camera, push the Autofocus button.
Note You can also assign the autofocus function to one of the programmable buttons.
For more information, see section 7.12 Programmable buttons.
7.4.2.1 Autofocus method
When autofocusing, the camera can use one of the following focus methods:
• Contrast: The focus is based on maximizing the image contrast.
• Laser: The focus is based on a laser distance measurement. The laser is used when
the camera is autofocusing.
#T810413; r. AF/83467/83910; en-US
22

FLIR T8 Series Specifications

General

Brand	FLIR
Model	T8 Series
Category	Thermographic Cameras
Language	English