Camera overview
6
6.4.3 Laser warning label
A laser warning label with the following information is attached to the camera:
6.4.4 Laser rules and regulations
Wavelength: 650 nm. Maximum output power: 1 mW.
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.
6.5 Viewfinder and display
By means of a sensor, the camera will register when you look into the viewfinder and
then automatically turn off the display. This behavior can be changed by a setting. Select
(Settings) > Device settings > Display settings > Active display. For more information,
see section 23.5 Device settings.
#T810413; r. AF/83467/83910; en-US
14
To Next Page
Loading...
Need help?
General
