1736/1738
Users Manual
18
Touch Screen
The touch screen lets you interact directly with what is on
the display. To change parameters, touch a target on the
display. Touch targets are easy to recognize, such as
large buttons, items in menus, or keys of the virtual
keyboard. The Product can be operated with insulating
gloves on (resistive touch).
Brightness Button
The touch screen has a backlight for work in dimly-lit
spaces. See Table 3 for the location of the Brightness ()
button. Push to adjust the brightness in two levels and
to turn on and turn off the display.
The brightness is set to 100 % when the Logger is
powered from mains. When powered from battery, the
default brightness is set to the power-save level of 30 %.
Push to toggle between the two brightness levels.
Push and hold for 3 seconds to turn off the display.
Push to turn on the display.
Calibration
The touch screen is pre-calibrated in the factory. If you
notice that the targets do not align with your touch on the
display, you can calibrate the display. Calibration of the
touch screen is available in the menu. See page 46
for more information about the touch screen calibration.
Basic Navigation
When an option menu shows on the display, use to
move within the menu.
The button has a dual use. In the Configuration and
Setup screens, push to confirm the selection. On all
screens, push for 2 seconds to take a screen shot. A
beep and the camera symbol on the display confirm the
action. See Screen Capture for more information about
how to review, manage, and copy the screen shots.
Along the bottom of the display, a row of labels shows the
available functions. Push or
below the display label to start that function. These labels
also work as touch targets.
To Next Page
Loading...
Need help?
General
