FRC InControl TGA100 User Manual

TGA100 Rev0106
5
Specifications
The INControl is available in various models. Each model is programmed to
interface with specific engines. All models provide the same functions, controls, and
digital readouts for the management of pump discharge pressure.
Control Panel
Supply Power: 12 VDC
Supply Current: 1.0 Amp
Dimensions: 9 3/4" Wide by 4 3/4" High by 2 3/4" Deep
LED Bar Graphs
Engine Oil Pressure: 10 to 90 PSI
Engine Coolant Temperature: 150 to 240 °F
Transmission Temperature: 140 to 300 °F
Battery Voltage: 11.5 to 15.5 VDC
Intake Pressure Sensor
Model Number: XE-IO3100PT2
Pressure Range: Absolute - 600 PSI
Proof Pressure: 1200 PSI
Excitation Voltage: 5 VDC
Output Voltage: 0.5 to 4.75 VDC
Discharge Pressure Sensor
Model Number: XE-FP4000PT1
Pressure Range: 0 to 600 PSI
Proof Pressure: 1200 PSI
Excitation Voltage: 5 VDC
Output Voltage: 0.5 to 4.75 VDC
Table 1. Pressure Sensor Output Voltage
0 psi 100 psi 150 psi 200 psi 250 psi 300 psi 600 psi
IO3100PT2 0.604 vdc 1.295 vdc 1.640 vdc 1.985 vdc 2.331 vdc 2.677 vdc 4.85 vdc
FP4000PT1 0.5 vdc 1.21 vdc 1.56 vdc 1.92 vdc 2.27 vdc 2.625 vdc 4.75 vdc

FRC InControl TGA100 Specifications

General

Brand	FRC
Model	InControl TGA100
Category	Controller
Language	English