Fuji Xerox C60 User Manual

4
Product Configuration
Item
Standard (✓)
or Option (O)
Comments
Print
Server
Digital Front End (DFE), RIP
O
There is a choice of Colour Print Server available for the
Color C60/C70 Printer and includes Integrated Fiery
Colour Server Ex-i, EX Print Server and Integrated
FreeFlow Print Server.
The Color C60 / C70 is not sold as a Copier only model
Feeding Options
Bypass Tray
✓
If an OHCF is purchased, the Bypass tray is relocated to
its new position on these units.
A4 High Capacity Feeder (A4 HCF)
O
Cannot work in tandem with another HCF or OHCF
A4 High Capacity Feeder (A3 OHCF)
single tray
O
Cannot work in tandem with another HCF or OHCF
Oversized High Capacity Feeder (A3
OHCF) 2 tray
O
Cannot work in tandem with another HCF or OHCF
Engine
(IOT)
Color C60 / C70
✓
Image Output Terminal (IOT) / Print Engine
Finisher Options
Interface Module (IFM)
O
Only required with a Finisher D4
Offset Catch Tray (OCT)
O
Cannot work in tandem with another Finisher Option
Standard Catch Tray
O
Cannot work in tandem with another Finisher Option
Finisher C3
O
Cannot work in tandem with another Finisher Option
Finisher C3 with Booklet Maker
O
Cannot work in tandem with another Finisher Option
Finisher C3 folder unit
O
Option for Finisher C3 only
Finisher D4 w/without booklet maker
O
Cannot work in tandem with another Finisher Option
and requires an IFM
C/Z Folding unit (D4 Folder Unit)
O
Option for Finisher D4 only
2/3/4 Hole Punch unit for Finisher C3
O
Options for Finisher C3 only
3 Hole Punch for Finisher D4
O
Option for Finisher D4 only
Square fold Trimmer
O
Option for Finisher D4 with Booklet Maker only
GBC AdvancedPunch
O
Requires an IFM and either HCS or Finisher D4
Space Requirements (Minimum Service Clearance)
These specifications are based on Occupational Health and Safety (OH&S) standards and allow for the safe and effective
operation and servicing of the device, including space for:
• Moveable components, such as draws and doors
• A technician to safely access the device
These space requirements (site width & site depth) are the minimum requirement and compliance with these standards is
mandatory for the safety of staff members. Site width and site depth changes with each configuration. Refer to the tables
below for actual site requirements for each configuration.
Site Diagram
Left Service
Clearance
330mm
Right
Service
Clearance
610mm
Front
Service Clearance
1070 mm
Site Width
*1
Site
Depth
*1
Machine IOT + chosen options
Rear Service Clearance
(Non Movable*
2
) 610mm
Rear Service Clearance
(Movable*
2
) 250mm

Fuji Xerox C60 Specifications

General

Brand	Fuji Xerox
Model	C60
Category	Printer
Language	English