Accessories/Options
Finishing Options & Specifications
Simple Catch Tray (SCT)
• The simple catch tray holds up to 500 sheets of A4 80gsm media.
Offset Catch Tray (OCT)
• The offset catch tray holds up to 500 sheets of SRA3 80gsm media.
C3 Finisher
The C3 Finisher is an output device that can perform up to 50-sheets stapling, hope punching, up to 3,000
sheets stacking.
• Tray
• Capacity/Weight/
Size
• Top tray
• up to 500 sheets of A4 80 gsm uncoated paper and can accommodate up to
SRA3 size media 52-300gsm. A5 LEF offsetting available.
Note: heavier paperweight will result in reduced output tray capacity
• Min: 100 x 148mm, Max: 330 x 488mm
• Finisher Tray
The Finisher Tray can accommodate up to330x488mm size media 52-300gsm.
•
• Min: B5 LEF, Max: 330 x 488mm
• Without stapling：
up to 3,000 sheets of A4, or 1500 sheets of B4 or larger at 80 gsm uncoated
paper.
Note: larger media will result in reduced output tray capacity.
• With stapling:
For A4 size, up to 200 sets (Single stapling), 100 sets(dual stapling), or 3000
sheets.
For B4 or larger, up to 100sets or 1500 sheets.
Note: larger media will result in reduced output tray capacity.
• Multi-position
Stapling
• Multi-position stapling of up to 50 sheets uncoated paper at 90 gsm.
• Quad stitch stapling available through EFI (stand alone and bustled).
⚫ 2/4 Hole Punch , or 2/3 Hole Punch are available, up to 200gsm.
⚫ Max size : A3
⚫ Min size: B5(2-hole punch), A4(4 hope punch)
To Next Page
Loading...
Need help?
General
