C3 Finisher with booklet maker
C3 Finisher with Booklet Maker
The C3 Finisher with Booklet Maker is a separate configuration that adds basic booklet making capability
to all the same features as the C3 Finisher.
C3 Finisher with Booklet Maker includes:
Hole Punch
Stapler
Top Tray
Finisher Tray
Booklet Unit capable of saddle stapling and bi-folding
NOTE: Hole punching is not available to the Booklet Tray
• Tray
• Capacity/Weight/
• Size
• Top Tray
⚫ up to 500 sheets of A4 80 gsm uncoated paper and can accommodate up
to 330x660mm size media 52-300gsm.
Note: heavier paperweight will result in reduced output tray capacity.
⚫ Min: 100 x 148mm, Max: 330 x 488mm
• Finisher Tray
• The Finisher Tray can accommodate up to330x488mm size media 52-300gsm.
•
• Min: B5 LEF, Max: 330 x 488mm
• Without stapling:
up to 1500 sheets of A4, or 1500 sheets of B4 or larger at at 80 gsm
uncoated paper.
Note: larger media will result in reduced output tray capacity.
• With stapling:
For A4 size, up to 200 sets (Single stapling), 100 sets(multi positioning
stapling), or 1500 sheets.
For B4 or larger, up to 100sets or 1500 sheets
Note: larger media will result in reduced output tray capacity.
• Booklet Tray
⚫ up to 20 sets of a maximum of 15 stapled sheets per set, and can
accommodate up to A3 media (uncoated 60-300gsm)(coated 106-
220gsm).
Note: larger media will result in reduced output tray capacity.
⚫ Min: B5, Max: 330 x 457mm
• Multi-position
Stapling
• 1,2 and 4 place stapling of up to 50 sheets uncoated paper at 90 gsm.
• Quad stitch stapling available through EFI (stand alone and bustled).
⚫ 2/4 Hole Punch , or 2/3 Hole Punch are available, up to 200gsm.
⚫ Max size : A3
• Min size: B5(2-hole punch), A4(4 hole punch)
• Booklet Making
capacity
⚫ Booklet saddle stitching available with Short Edge Feed (SEF) paper sizes A4,
A3.
⚫ The Finisher Booklet Maker Tray can accommodate up to 20 sets of up to 15
sheets per set when stapled.
Booklets can consist of 2 to 16 sheets of 80 gsm
• Booklet stitching available with paper sizes of A4, B4, A3, SRA3. Booklets up to
16 sheets of non-coated 90 gsm or 14 sheets of non-coated 80 gsm plus 1
non-coated cover between 90-176 gsm
• Saddle- Stitch
Stapling
• 2-16 sheets / 8-60 page booklet of the media 60-90gsm.
Single-Fold is folding a single paper without stapling.
• It can fold the media from 60-220gsm, and the media size of B5 to
SRA3(330x457mm).
• It can fold the media from B5 to SRA3(330x457mm), with media weight of
60-220gsm.
Bi-fold is folding papers of 2 or more sheets without stapling.
• It can fold the media from B5 to SRA3(330x457mm), with media weight of
60-220gsm.
• It can bi-fold up to 5 sheets.
Staple capacity will decrease if gsm increases
Destination for coated stock is the Top Tray only.