*1: 80 gsm Paper *2: Power supply separate from the main unit is required.
Light Production Finisher or Finisher D4 – Shown with Optional Booklet
Maker
• 100-sheet stapling,
• 3,000 sheets stacking,
• punch,
• saddle stapling/center-fold,
• optional Z-fold/three-fold, and cover paper insertion.
The Finisher D4 has a built-in decurler unit that corrects the curl on paper outputted from
print engine, a built-in stapler with staple-pin cut function, and a built-in interposer that
feeds cover paper to finisher for saddle-staple operation.
The Finisher D4 with optional booklet unit (shown in photo) includes the punch and stapler, the stacker tray and top exit
tray, and a booklet unit capable of saddle stapling and bi-fold.
Light Production Finisher or Finisher D4 Tray Capacity
• 500 sheet top tray (80gsm),
• 3,000 sheets for (A4 only) or 1,500 sheets other than A4 in the stacker tray (80gsm)
• 200 sets or 3,000 sheets A4 Single staple, 100 sets or 1,500 sheets A4 dual staple for the Stacker Tray.
• Uncoated 64-300gsm/Coated 106-300gsm Top tray,
• Uncoated 64-300gsm/Coated 106-300gsm Finisher tray
• 1,2 and 4 place stapling of up to 100 sheets of 80gsm uncoated paper, available to the finisher tray.
• Staple capacity is from 203.2 mm x 254 mm up to A3
• Non-stapled Booklets: 5 sheets/set (90 gsm Colotech+)
• Bi-Fold: 1 sheet/set, Uncoated 64-220gsm/c
• Cover Sheet in a Booklet: A single sheet cover is able to be used (Uncoated 91-220gsm/Coated 106-220gsm)
• Bi-folding paper can be one of the following sizes - A4, B4, A3, 12x18in & SRA3
• Bi-Folding accuracy for non-stapled sheets: ≤1.5 mm
• Booklet fold accuracy of the inner sheet (lead and side edge): Non Stapled and Stapled: ≤1.5 mm for A4 sheets,
≤2.0 mm for other sizes
• Bi-Fold fold accuracy (lead and side edge): ≤2.5 mm (non booklet job)
NOTE: SRA3 or larger cannot be offset
NOTE: Bi-fold unavailable in Copy Mode
NOTE: Bi-fold option only available when the Booklet Maker option is purchased
To Next Page
Loading...
Need help?
General
