Fuji Xerox C60 User Manual

6
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit)
3637
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + Square Fold Trimmer
4419
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + GBC AdvancedPunch
3942
2483
Non-Movable Installation
IOT + A4 High Capacity Feeder (HCF) + IFM + D4 Finisher (with Booklet
Maker & Folder Unit) + GBC AdvancedPunch + Square Fold Trimmer
4724
2483
Non-Movable Installation
IOT with Oversize High Capacity Feeder (OHCF)
Configuration
Min. Site Space (mm)
Comment
Site Width
Depth (with
Integrated Fiery)
IOT + OHCF + Catch Tray
3080
2483
Non-Movable Installation
IOT + OHCF + C3 Finisher
3510
2483
Non-Movable Installation
IOT + OHCF + Finisher C3 Finisher (with Booklet Maker)
3569
2483
Non-Movable Installation
IOT + OHCF + Finisher C3 Finisher (with Booklet Maker & folder unit)
4040
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker )
4065
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + Square Fold
Trimmer
4847
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + GBC
AdvancedPunch
4370
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker ) + GBC
AdvancedPunch + Square Fold Trimmer
5152
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit)
4265
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
Square Fold Trimmer
5047
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
GBC AdvancedPunch
4570
2483
Non-Movable Installation
IOT + OHCF + IFM + D4 Finisher (with Booklet Maker & Folder Unit) +
GBC AdvancedPunch + Square Fold Trimmer
5352
2483
Non-Movable Installation
Where a device is installed adjacent to an access way, additional space over and above that specified in this document
may be required. Space required for access ways is dependent on circumstance, and it is recommended that the local
statutory body be contacted for advice.
Installation Requirements
This section contains information on preparing for the delivery and installation of the Color C60 / C70 Printer
General Installation Requirements
• The product should not be exposed to direct sunlight, external heat sources, excessive dust or vibration.
• Do not operate the machine in a poorly ventilated room.
• The machine must be located on a stable and level floor.
• The site clearances must conform to the specifications stated in “Space Requirement (Minimum Service
Clearance)”
• At least 1 x network drop required for each Color C60/C70 installation. Additional drops may be required if
product is configured with an external print server.

Fuji Xerox C60 Specifications

General

Brand	Fuji Xerox
Model	C60
Category	Printer
Language	English