Machine component dimensions & weight (in preparation for Delivery)
Physical modules and Print Server dimensions.
Refer to “Space Requirement (Minimum Service Clearance)” for configured site specifications
Delivery Restrictions
Any deliveries not occurring at street level locations must have elevators large enough to accommodate the product
modules. Passageways (doorways and hallways) must also be large enough to allow the machine to pass through.
Temperature & Humidity
Maximum: 32C and 85%RH
Minimum: 10C and 10%RH
Drastic climatic changes are detrimental to image quality, performance and consistency. It is strongly recommended that
the product be operated in an air-conditioned environment to achieve best performance.
For optimal operation of the printing system the temperature should be maintained between 20-25C and humidity
between 45-55% RH
Electrical Requirements
A dedicated 10Amp, 240Volt 50Hz supply is required for each Color C60 /C70 Printer IOT installation*.
In addition, the Color C60/C70 will require individual additional power outlets depending on options purchased:
To Next Page
Loading...
Need help?
General
