Cost Recovery
EPSV (Electronic Partnership Supervisor)
The EPSV is currently supported on Color C60/ C70 with Integrated Fiery controller and connection to Equitrac systems
only.
Since the Color C60 and C70 with Integrated Fiery controller are designed for production environments, there are
limitations when connecting to external cost recovery systems.
• Black and white pages on the Equitrac server will count as colour for RGB and CMYK gray files
• Equitrac will record jobs that have incorrect property settings and have been suspended by the Integrated
Fiery Controller after a certain time. Fiery Command Work Station (CWS) is required to release the job.
• Only 1 printed job is kept on the Integrated Fiery Controller.
• Reprinting the job using CWS will not be tracked by the Equitrac Server.
• A Printer that is setup on the Equitrac server that does not use the Equitrac port will not be tracked.
• When installing the printer using the Equitrac port, all the colour management features of the Integrated
Fiery are disabled. Therefore color output may not be as accurate as expected.
The Equitrac Customer Expectation Document should be read in conjunction with this information.
A Fuji Xerox Analyst can assist with questions relating to Color C60 / C70 and Cost Recovery.
Envelopes
The C60/C70 currently supports running the following envelope sizes through Tray 5. Depending on thickness, up to 50 envelopes can
be loaded. Envelopes can also be fed from HCF Trays 6 & 7 with the small media bracket (post card kit) installed. Stack heights in these
trays may need to be reduced if jams are encountered with various envelope types.
To Next Page
Loading...
Need help?
General
