46 3 Print
Envelopes with Non-adhesive Flaps
1. Load the envelope with the address side
facing down and the edge with the flaps
against you. Make sure that the flaps are
open.
2. Adjust the paper guides to the size of the
envelopes.
Note
• When loading the envelopes in the tray, make sure
that the flaps are completely open.
Printing on Envelopes
The following procedure uses Windows XP WordPad as an example.
Note
• The method of displaying the Properties dialog box varies depending on the application being used.
Consult the documentation for your application.
1. On the [File] menu, click [Print].
2. Select the printer from the [Select Printer] list box, and click [Preferences].
3. The [Paper/Output] tab appears.
From [Paper Source], select [Bypass Tray].
4. From [Paper Type], select [Envelope].
5. From [Bypass Feed Orientation], select the orientation of the envelopes.
6. From [Paper Size], select the size of the document to be printed.
4
3
6
5
To Next Page
Loading...
Need help?
General
