3.7 Printing After Checking the Print Result - Sample Print - 63
3.7 Printing After Checking the Print Result
- Sample Print -
When the optional hard disk is installed, the Sample Print feature can be used on the printer.
Important
• In case the hard disk fails, we encourage you to back up the hard disk data on your computer.
Sample Print Feature
Sample Print is a feature that allows you to print a proof copy of a multi-print job and print
the entire sets once the print result has been verified. The job is stored on the printer's hard
disk until the whole sets are printed from the control panel.
Note
• To delete a Sample Print job without printing, refer to "Operations on the Control Panel" (P. 61).
• Sample print jobs cannot be printed when [Secure Print] > [Activate Feature] is set to [Disable] on the
control panel.
Printing Using the Sample Print Feature
The following explains how to sample print a job.
To sample print a job, configure the following settings on your computer and send the job
to the printer. Then, operate the control panel to manually start printing.
Operations on Your Computer
The following procedure uses Windows XP WordPad as an example.
Note
• The method of displaying the Properties dialog box varies depending on the application being used.
Consult the documentation for your application.
1. On the [File] menu, click [Print].
2. Select the printer from the [Select Printer] list box, and then click [Preferences].
3. The [Paper/Output] tab appears.
Under [Copies], specify two or more copies.
4. From [Job Type], select [Sample Print].
Send
data
Stored
1 set is printed
e pr
n
result is OK
If the print
result is not OK
Cancel the job on the control
panel
Print the rest of the sets from
the control panel
To Next Page
Loading...
Need help?
General
