Fujitsu ScanSnap S1300 Installation And Troubleshooting Guide

How to find your resolution
10
How to find your resolution
When you have trouble installing the software successfully or the ScanSnap does not operate
normally after installation is complete, refer to the flow chart below for troubleshooting.
Yes
No
"If your first attempt to install
failed" (page 11)
Have you installed
the software before?
"If you have installed the
software before" (page 12)
Is the installation
complete?
"When the ScanSnap Manager
icon does not appear" (page
24)
Does the ScanSnap
Manager icon
appear on the
taskbar?
"When ScanSnap Manager
does not operate normally"
(page 25)

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g