Fujitsu ScanSnap S1300 Installation And Troubleshooting Guide

When ScanSnap Manager does not operate normally
30
7. Restart your computer.
8. Connect the USB cable to the computer.
9. Turn the ScanSnap on.
D The ScanSnap Manager icon appears on the taskbar. Make sure that the displayed
icon is .
If the problem persists, refer to "If you have installed the software before" (page 12). If the problem still
persists, perform the procedures described in "When ScanSnap Manager does not operate normally"
(page 25) once again.
If the above procedures do not solve the problem, please attach the data of your system information to an
email and send it to your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
For details about how to collect system information, refer to "Troubleshooting" in ScanSnap Manager
Help.

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g