Fujitsu ScanSnap S1300 Installation And Troubleshooting Guide

If your first attempt to install failed
11
If your first attempt to install failed
This section explains how to troubleshoot when you failed to install the bundled software the
first time.
If you have installed any software bundled with the ScanSnap (including models other than
S1500/S1500M/S1300i/S1300/S1100) before, refer to "If you have installed the software
before" (page 12).
1. Restart the computer and log on as a user with Administrator privileges.
2. Reinstall the software.
For details, refer to "Installing in Windows" (page 36).

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g