EasyManuals Logo
Home>Fujitsu>Scanner>ScanSnap S1300

Fujitsu ScanSnap S1300 Installation And Troubleshooting Guide

Fujitsu ScanSnap S1300
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
When ScanSnap Manager does not operate normally
25
When ScanSnap Manager does not operate
normally
If the ScanSnap Manager icon is displayed as even though you installed the software and
connected the ScanSnap to the computer, perform the following procedures.
Removing unnecessary icons from the taskbar
1. Check the software icons on the taskbar, and exit the software that you
are not using.
D The icon is removed from the taskbar.
2. Right-click the ScanSnap Manager icon on the taskbar, and select
[Exit].
3. Start up ScanSnap Manager again by selecting [Start] menu
[All Programs] [ScanSnap Manager] [ScanSnap Manager].
Checking the connection between the ScanSnap and
the computer
1. Unplug the USB cable from the computer and the ScanSnap, then plug it
back in.
Make sure to leave at least five seconds between unplugging and plugging the cable.
If you are using a USB hub, connect the USB cable to the computer directly.
If the problem persists, refer to the next topic "Checking the connection between the ScanSnap and the
computer" (page 25).
If the problem persists, refer to the next topic "Checking if ScanSnap Manager is operating normally"
(page 26).

Table of Contents

Other manuals for Fujitsu ScanSnap S1300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap S1300 and is the answer not in the manual?

Fujitsu ScanSnap S1300 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Maximum scan size216 x 360 mm
Scanner typeSheet-fed scanner
Sensor typeCIS
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Auto document feeder (ADF) input capacity10 sheets
USB version2.0
Standard interfacesUSB 2.0
Scan media weight64 - 104.7 g/m²
Dimensions (WxDxH)284 x 99 x 77 mm
Power requirementsAC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)20 - 80 %
Minimum RAM512 MB
Minimum storage drive space2197 MB
Sustainability certificatesENERGY STAR
Power consumption (standby)5 W
Power consumption (typical)9 W
Operating temperature (T-T)5 - 35 °C
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Depth99 mm
Width284 mm
Height77 mm
Weight1400 g

Related product manuals