Fujitsu ScanSnap S1300 Installation And Troubleshooting Guide

If you have installed the software before
33
If you have installed the software before
This section explains how to troubleshoot when you failed to reinstall the software in a
computer in which the software bundled with the ScanSnap (including models other than
S1500/S1500M/S1300i/S1300/S1100) has been installed before.
1. Uninstall the software.
For details, refer to "Uninstalling in Mac OS" (page 75).
2. Install the software.
For details, refer to "Installing in Mac OS" (page 56).

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g