Fujitsu ScanSnap S1300 Installation And Troubleshooting Guide

Introduction
4
■ About This Manual
Structure of This Manual
This manual consists of the following:
Troubles and Resolutions in Windows
This chapter explains about the resolutions for when you failed to install the
software bundled with the ScanSnap, or when the ScanSnap does not operate
normally after software installation.
Troubles and Resolutions in Mac OS
This chapter explains about the resolutions for when you failed to install the
software bundled with the ScanSnap.
Installing the Software
This chapter explains how to install the software bundled with the ScanSnap.
Uninstalling the Software
This chapter explains how to uninstall each software.
Arrow Symbols in This Manual
Right-arrow symbols (→) are used to connect icons or menu options you should select in
succession.
Example: Select [Start] menu → [Computer].

Fujitsu ScanSnap S1300 Specifications

General

Film scanning	No
Color scanning	Yes
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 99 x 77 mm
Power requirements	AC 100 - 240V, 50/ 60 Hz
Non-operating relative humidity (non-condensing)	20 - 80 %
Minimum RAM	512 MB
Minimum storage drive space	2197 MB
Sustainability certificates	ENERGY STAR
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Operating temperature (T-T)	5 - 35 °C
Certification	RoHS

Weight and Dimensions

Depth	99 mm
Width	284 mm
Height	77 mm
Weight	1400 g