Fujitsu SP-1120 User Manual

Chapter 1 Scanner Overview
16
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
This section explains how to power on/off the scanner.
Turning the Power ON
1 Press the power button on the operator panel for more
than 2 seconds.
 The scanner is turned on, and during initialization, the power
indicator flashes.
When the power indicator stays on, the scanner is ready to scan.
This is referred to as "ready" status.
Turning the Power OFF
1 Press the power button on the operator panel for more
than 2 seconds.
 The scanner is turned off, and the power indicator turns off.
1.3 Turning the Power ON/OFF
HINT
When the scanner is ready to be used, the check indicator turns off
and the power indicator turns on.
Power button
Power
indicator
Check
indicator

Fujitsu SP-1120 Specifications

General

Brand	Fujitsu
Model	SP-1120
Category	Printer
Language	English