Chapter 7 Troubleshooting
81
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
There are black traces on the document.
Are you scanning documents written in lead pencil or
carbon paper?
Yes
When you scan documents written in lead pencil, make sure to clean the rollers
frequently. Otherwise, the rollers will be contaminated which may leave black
traces on the document or cause feeding errors.
For details, refer to "Chapter 5 Daily Care" (page 48).
No
Are the glass parts and rollers inside the ADF clean?
No
Clean the inside of the ADF.
For details, refer to "Chapter 5 Daily Care" (page 48).
Yes
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 82) first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.