Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
Chapter 6 Replacing the
Consumables
This chapter explains how to replace the consumables for the scanner.
6.1 Consumables and Replacement Cycles.....................................................................................................58
6.2 Replacing the Roller Set.............................................................................................................................59
The inside of the ADF becomes very hot when the
scanner is being used.
Before you replace the consumables, make sure to
turn off the power, unplug the power cable and wait
at least 15 minutes for the ADF glass to cool down.