Chapter 7 Troubleshooting
72
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
Quality of scanned text or lines is unsatisfactory.
*1: When scanning in grayscale or color, the scanned image may not become sharp and clear.
Are the glass and rollers inside the ADF clean?
No
Clean the inside of the ADF.
For details, refer to "Chapter 5 Daily Care" (page 48).
Yes
Is the resolution appropriate?
No
Specify a higher resolution in the scanner driver.
Yes
Is grayscale or color set in the scanner driver?
Yes
Set black & white in the scanner driver, then scan again. (*1)
No
Is there any foreign matter (e.g. dust, paper dust) on the
document?
Yes
Remove any foreign matter from the document.
It may be carried onto the glass inside the ADF and cause the image to become
dirty.
No
If the problem persists, check the items in "7.4 Before You Contact the Scanner
Service Provider" (page 82) first, then contact your FUJITSU scanner dealer or an
authorized FUJITSU scanner service provider.
To Next Page
Loading...
Need help?
General