Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
Chapter 5 Daily Care
This chapter explains how to clean the scanner.
5.1 Cleaning Materials and Locations that Require Cleaning...........................................................................49
5.2 Cleaning the Outside ..................................................................................................................................51
5.3 Cleaning the Inside.....................................................................................................................................52
Do not use aerosol spray or spray that contains alcohol to clean
the scanner. Dust blown up by strong air from the spray may
enter inside the scanner which may cause the scanner to fail or
malfunction.
Also note that sparks generated by static electricity may cause a
fire.
The inside of the ADF becomes very hot when the scanner is
being used.
Before you start cleaning the inside, make sure to turn off the
power, unplug the power cable and wait at least 15 minutes for
the ADF glass to cool down.
To Next Page
Loading...
Need help?
General