Chapter 3 How to Use the Operator Panel
40
Appendix
Glossary
Contents
TOP
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Index
Introduction
Signals on the Indicator
Check
indicator
Power
indicator
Description
Off Flashes Processing initialization.
Continues until the scanner is ready when
resuming from power saving mode or after
closing the ADF.
Off On The scanner is ready to be used.
Indicates that the initialization is successfully
complete.
The indicators operate in the same way when
the scanner is in power saving mode.
On On Indicates that a temporary error occurred
during scanning.
For details about errors, refer to "Temporary
Errors" (page 66).
Flashes On Indicates that a device error (alarm) occurred
during initialization or scanning.
For details about errors, refer to "Device
Errors" (page 67).
To Next Page
Loading...
Need help?
General