Working with the Tablet PC
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data to hand.
Information on configuring W LAN access can be found in the
documentation for your operating system.
Further information on WLAN and Bluetooth
For further information about WLAN or B luetooth, please refer to the
appendix of this O pera ting M a nual.
For W LAN specifications, see chapter "
WLAN specifications", Page 82.
NFC (Near Field Commu
nication, configuration dependent)
Depending on the con figu ration chosen, your Tablet PC may be equipped with an
integrated NFC chip. Near Field Communication is used for contactless exchange of
data via radio over short distances (a few centimeters).
Ethernet and LAN (only with docking cradle)
EthernetLAN
The internal ne
twork module of your Tab let PC supports Ethernet LAN. You can use it to
establish a con
nection to a local network (LAN = Local Area Network).
2
1
► Con nect the net
work cab le to the LAN
port of the do c
king cradle (1).
► Con nect the network cable to your
network connection (2).
Your network administrator can help y ou to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
Fujitsu 41
To Next Page
Loading...
Need help?
General