Connecting external d evices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"
Important notes", Page 13 chapter before connecting or disconnecting
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. A lways grasp the plug.
With some de vice s, such a s USB devices, it is not necessary to switch off
the Tab let PC and the device before conne cting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the document ation supplied with your external de vice.
Some of the external devices require special drivers (see the o perating
system an d external device documentation).
Connecting an external monitor
Information on screen resolution can be found in the section "Screen resolutions
for inte grated screen and external screens", Page 83.
Mini Display Port
DisplayPort
The mini Disp
lay Port of the Tablet PC can be used to connect a monitor, an LCD
TV or a plasma
TV with a corresponding connection.
► Connect the
data cable to the
external de
vice.
► Connect the data cable to the mini
Display Port of the Tablet PC.
Some LCD televisions have only two speaker connections and therefore
cannot reproduce Dolby Digital or DTS. In order to reproduce the sound, you
must go into Windows and adjust the so und settings.
► To do
this, deactivate the DTS Audio and Dolby Digital settings in the control
pan
el for the Realtek HDMI Output.
62 Fujitsu
To Next Page
Loading...
Need help?
General