Connecting external devices
Display Port (docking cradle only)
DisplayPort
The Display Port of the docking cradle can b e used to connect a monitor, an LCD
TV or a plasma TV with a corresponding conn ection. Display output is limited to a
maximum of two external screens at the same time.
► Con nect the data cable to the
external device.
► Con nect the data cable to the Display
Port of the c radle.
Some LCD televisions have only two speaker connections an d therefore
cannot reproduce Dolby Digital or DTS. In o rder to reproduce the sound, you
must go into Windows an d adjust the sound settings.
► To do this, deactivate the DTS Audio and Dolby Digital settings in the control
panel for the Realtek HDMI Output.
HDMI port (docking cradle o nly)
HDMIport
TheHDMIporto
f the d ocking cradle can be used to connect an external amplifier,
LCD TV or a plas
ma TV with an HDMI c onnection. Display output is limited to a
maximum of two
external screens at the same time.
► Con nect the d
ata cable to the
external de
vice.
► Con nect the data ca ble to the HDMI
port of the docking cradle.
Some LCD televisions have only two speakers/speaker ports and therefo re
cannot reproduce Dolby Digital or DTS. To play back HDMI sound, you
must change th e HDMI sound settings accordingly.
You can find the settings under Control Panel - Hardware and Sound. Deactivate the
settings f or DTS Audio and Dolby D igital to enable playback of HDMI sound.
Fujitsu 63
To Next Page
Loading...
Need help?
General