20 - English Operation
Changing the monitor settings
► When y ou start up the Zero Client for the
first time, after logging in to the system start
the Zero Client Control Panel program by
double-clicking the icon in the taskbar.
► Select Display and Screen resolution.
► Set the "Screen Resolution" to 1680 x
1050 pixels (Zero Client DZ22-2) or 1280
x 1024 pixels (Zero Client DZ 19-2).
► Confirm with OK or Apply.
► Log out from the "Virtual Deskto p" and then
log in again for the changes to take effect.
Setting a turn-off timer for the monitor
You can se t a turn-off timer, which switche s the monitor off if no inputs are made over a
specified period of time using input devices such as mouse or keyboard.
► To start the Zero Client Control P a nel program, double-click on the icon in the taskbar.
► Select Display and Turn off monitor.
► Set the time after which the monitor is to be turned off.
► Confirm with OK or Apply.
The monitor is turned off after the turn-off time set has elapsed, in order to save
energy (the monitor’s backlight is switched off).
If the mouse is m o ved or a button is pressed, Zero Client switches back
to normal operating mode again.
22 Fujitsu Technology Solutions
To Next Page
Loading...
Need help?
General