Furuno FCV-587 User Manual

1. OPERATION
19
How to register a waypoint by manual
entry of latitude and longitude
1. Open the menu, select [Data] and press
the ENTER key.
2. Select [WPT List] and press the ENTER
key.
3. Select an empty waypoint and press the
ENTER key. The Waypoint setting win-
dow appears. [Lat] and [Lon] show the
current position.
4. Select item desired and press the ENTER
key to show corresponding input box.
5. Enter name or latitude and longitude as
applicable.
6. Press the MENU/ESC key to register the
window.
7. Press the MENU/ESC key again to close
the window.
1.19.2 How to edit registered
waypoints
Registered waypoints can be freely edited.
1. Open the menu, select [Data] and press
the ENTER key.
2. Select [WPT List] and press the ENTER
key.
3. Select the waypoint to edit and press the
ENTER key.
4. Select the item desired and press the EN-
TER key.
5. Edit data as appropriate.
6. Press the MENU/ESC key twice to return
to the [WPT List].
1.19.3 How to erase waypoints
Waypoints can be erased two ways: individu-
ally or collectively. A waypoint set as destina-
tion cannot be erased.
How to erase individual waypoints
1. Open the menu, select [Data] and press
the ENTER key.
2. Select [WPT List] and press the ENTER
key.
3. Select the waypoint to erase and press
the ENTER key.
4. The message "Erase?" appears; press
the ENTER key.
5. Select [Yes] and press the ENTER key.
6. Press the MENU/ESC key to close the
window.
*: Go to WPT
and WPT
List are
inoperative
when no
latitude and
longitude
position is
input (to the
12-24
VDC/NMEA
port).
*
*
Waypoint name Latitude Longitude

Furuno FCV-587 Specifications

General

Brand	Furuno
Model	FCV-587
Category	Fish Finder
Language	English