DSC60
B4-3
Setup
menu
Item setting Note
2M FIXED FIXED
ON
4M
OFF
ON
ON
6M
OFF
ON
8M FIXED FIXED
ON
12M
OFF
ON
ON
SCAN
FREQ.
DISTRESS
16M
OFF
ON
*MF/HF type: watch keeping
2, 8MHz and other one Freq.
*MF type: Fixed on 2MHz.
Note)
Depend on “WACTH RCVR”
setting in Setup menu-SYSTEM.
ON
KEY CLICK
OFF
ON
HANDSET 32 32 ADJ.:0-63
ORDINARY
ALARM
8 8 ADJ.:0-63
VOLUME
DISTRESS
ALARM
8 8 ADJ.:8-63
MMSI
X1–X9
(FIXED)
FIXED
With MNI switch set to on, and
enter the password (652111).
MF/HF MF/HF type WATCH
RCVR
MF MF type
Depend on specification.
(Sea area A3:Set to MF/HF type.)
LINE OUT
LEVEL
0dBm 0dBm
TX KEY
TIMING
AUTO AUTO
MIF
IEC
RT PORT
OFF
MIF
When FS-xxxx connected, set to
MIF.
ON REMOTE
STATION
OFF
ON or OFF Depend on specification
OFF
NBDP PORT
ON
ON or OFF When DP-6 connected, set to ON.
CH DET S
LEVEL
OFF – 255
(100)
100
Used for CH busy check.
(Calling category: routine and
business used)
INTL
SYSTEM
(PROTECTED)
Pass word:
652111
Note)
REGULATION
RUSSIA
INTL
Russian vessel: setting to
“RUSSINA”
DIST Date & UTC --
Date and UTC indication of
transmitted Distress alert
Note)
“SYSTEM” menu is protected. To cancel the protection;
1. While displaying DSC normal display, press [SETUP]. The setup menu appears.
2. Select “SYSTEM” by using an arrow key.
3.Press [ENT] key.
4. Confirm that “PROTECTION”: ON is displayed on the bottom line. Type 652111.
5. Then, “PROTECTION” ON is changed to “PROTECTION” OFF, which enables
setting of each item. Now you can modify each item in the system setup menu.
Main Ver:2.09
Main Ver:2.09
Main Ver:2.09
To Next Page
Loading...
Need help?
General
