Furuno FM-7000 User Manual

DMC-5
F1-3
3. Clearing Contents of S-RAM and EEROM
After replacing the ROM on the CONTROL board or if the unit is not working properly,
be sure to press the NMI switch on the CONTROL board after turning on the unit, to
clear contents of S-RAMs
Procedures
1. Press the NMI switch S1 on the CONTROL board with the unit turned on.
2. Since the power is automatically cut off, turn the power on.
3. The screen should look something like this:
4. Select RAM 1, RAM 2 or EEROM by pressing the [SELECT] key.
RAM 1 or RAM 2 clear
When Select to RAM 1 or RAM 2, press the [ENT] key;
The power is automatically cut off. Turn the power on again manually.
Clear <Do not clear>
NO RAM1 RAM2 EEROM

Furuno FM-7000 Specifications

General

Brand	Furuno
Model	FM-7000
Category	Marine Equipment
Language	English