14. AIS TARGET FUNCTIONS
14-13
14.11 TT, AIS Target Association
A vessel that carries an AIS transponder is marked on the display with both an AIS-
symbol (based on GPS position) and a TT symbol (radar-detected target).
To avoid the presentation of two target symbols for the same physical target, use the
"association" function. If target data from both AIS and TT are available and if the as-
sociation criteria are fulfilled, either the AIS or TT symbol is presented according to the
association method selected. Association will not happen between AIS and TT if the
AIS target is sleeping.
The target data to have priority is controlled from the [TT/AIS] page in the [Overlay/
NAV Tools] box. Click the arrow circled in the figure below to select target data prior-
ity;.
Note: The association data priority can also be
selected from a context menu. Right-click the
arrow on the TT/AIS page to display the win-
dow shown right.
14.12 How to Display Own Ship Data
You can see own ship's data on the [Own Ship] page in the [NAV Status] menu. Open
the menu then click both [NAV Status] in the [TT/AIS] menu and the [Own Ship] tab.
AIS data priority TT data priority
>
TT data priority
AIS data priority
MMSI: 457804356
Name: FURUNO Voyager
Call Sign: JZ5890312
Type: 0
Description: All ships of this type
Length(LOA): 223.2 m
Width: 31.8 m
Ref Bow: 3.3 m
Ref Port: 2.8 m
To Next Page
Loading...
Need help?
General
