1. INTRODUCTION
1-16
1.17 How to View ECDIS Software Version No., ECDIS
System Information, and Operator's Manual
You can show ECDIS program no., ECDIS system information, and the operator's
manual. Click the [?] button on the Status bar then select [Manual] to show the oper-
ator's manual, or [About] to show ECDIS and system related information.
[Manual] shows the Operator’s Manual.
[About] shows the system information, prepared in four tabs.
• [Version]: Shows the ECDIS software version no., conning software version no.,
S52 presentation library version, ENC user permit no., and C-MAP SDK software
version no.
• [System 1]: Shows ECDIS system information: CPU type, RAM capacity, SSD free/
SSD capacity, Equipment ID and dongle information. [Function] shows this unit’s
capabilities.
• [System 2]: Shows the startup time of the current session
• [Applied Standards]: Shows the IEC standards that the system conforms to.
The information shown may be different than what appears on your display.
*: Actual permit number appears here.
XXXXXXXXXXXXXXXXXXXXXXX*
To Next Page
Loading...
Need help?
General
