2. OPERATIONAL OVERVIEW
2-5
2.1.2 Status bar
The Status bar mainly provides for selection of operating mode, chart type and IMO
chart display setting.
No. Button Description
1 Display mode No use
2 NAVI Selects the Voyage navigation mode.
3 CHARTS Goes to the Chart maintenance mode.
4 PLAN Selects the Voyage planning mode.
5 OTHERS • Sets system in SILENT mode (standby).
• Plays back log data (AMS connection must be off).
6 CLEAR RADAR Hide the TT, AIS and radar displays. Shown only when one of the follow-
ing conditions is met:
• TT targets are shown on the display.
• AIS targets are shown on the display.
• Radar overlay is active.
7 CHART ONLY Shows only the chart, when the left button is pressed and held down.
8 STD DISP Restores the IMO standard display instantly.
9 Chart priority Selects chart priority when both vector or raster are available.
10 Chart database Selects the pre-defined presentations of ENC content: [IMO BASE],
[IMO STD] or [IMO ALL]. [CUSTOM] appears when the symbols select-
ed or deselected on the [Chart Display] menu do not match the preset
conditions for [IMO BASE], [IMO STD] or [IMO ALL].
11 Displays the operator's manual, ECDIS program no. and system info.
12 Manages user profiles; opens the [Settings] menu.
13 Date • Displays the date.
• Selects the time to use, local or UTC.
• Sets the time difference between local and UTC (to use local time).
14 Time Shows the time, UTC or local.
15
Working indicator
Rotates clockwise if the system is working properly. If it is not rotating
the system is not working. Shortly after it stops spinning the buzzer
sounds. Reset the power to restore normal operation.
NAVI
To Next Page
Loading...
Need help?
General
