Furuno FS-2550 User Manual

DSC-8V/8VP
B3-6
4. Clear to RAM 1, RAM 2 or EEROM.
RAM 1 or RAM 2 clear
When Select to RAM 1 or RAM 2, press the [ENT] key;
For DSC-8VP
a, The power is automatically cut off.
b, Turn the power on again manually.
For DSC-8V
Turn the power off and on again manually.
The normal display appears.
EEROM clear
When select to EEROM, press the [ENT] key;
After about 15 second ,
For DSC-8VP
a, The power is automatically cut off.
b, Turn the power on again manually.
For DSC-8V
Turn the power off and on again manually.
The initial setting display appears.
(Refer to section “3. System settings list”)
Note)
Before clearing EEROM, print out the contents of EEROM
by pressing the [4] key.
Contents of S-RAM and EEROM
Item Purpose
RAM 1 Clears work area only in the S-RAMs.
RAM 2
Clears all contents of the S-RAMs
(incl. transmitted and received messages, and prepared in
messages/address/Tel No in FILE menu: [SELECT] [7])
EEROM
Clears contents of EEROM.
(Own ship’s ID number, etc)
TEST
Watch VHF CH70

Furuno FS-2550 Specifications

General

Brand	Furuno
Model	FS-2550
Category	Marine Equipment
Language	English