FELCOM 82
H3-27
3.4.2 Telex (for class-1)
Before the test, confirm that the DMG ([FUNC] [5] [8]) is setup correctly. During the
test, data in the Distress Message Generator (DMG) is sent to the LES selected by
[FUNC] [5] [7].
To test the telex distress button;
1. On the handset, press [FUNC] [6] [8] to call Test menu.
2. Press [3] key, followed by [Enter] key. DISTRESS TEST MODE appears on the
handset screen, and printed out is “DISTRESS TEST Mode entered.”
2001-01-10
00:00UTC
DISTRESS
TEST MODE
#III POR Ready
3. Within 30 seconds, press “DISTRESS” button on the IB-352 for more than 6
seconds.
“Telex Distress Button Pressed.” and
“Telex Distress Button Activated” are printed out.
The test alert message is transmitted automatically and the reply from the LES
should be received. Yamaguchi replays the following messages, for example.
4. Press [F10] key to terminate the test.
--------------TELEX DISTRESS ALERT MESSAGE-------------------------------------
01-01-30 05:26 YMI 003
343199710 FRTS X
THIS IS INMARSAT RECORDED MESSAGE.
TO
343199710 FRTS X
MARITIME
LAT 34 45 N , LONG 135 21 E
05 26 UTC , 30 JAN
10
215
00
UR TEST DISTRESS CALL HAS BEEN SUCCESSFULLY RECEVED.
PLEASE REMENBER TO RE-SET 04894856 59 ‘ROUTINE’.
END OF MESSAGE.
CECI EST UN ACCUSE DE RECEPTION PRE-ENREGISTRE D’INMARSAT.
VOTRE ESSAI D’APPEL DE DETRESSE A REUSSI.
VEUILLEZ RETABLIR L’INDICATEUR DE PRIORITE EN MODE ‘ROUTINE’.
FIN DU MESSAGE.
---- +END OF CALL+ -------------------------------------------------------------------------
To Next Page
Loading...
Need help?
General
