CHAPTER 9
TRIP PLANNING
The GPS 100 allows you to perform trip and fuel planning, and calculate
aviation data such as vertical speed, true airspeed, and wind.
These functions are accessed from Navigation Menu 1, illustrated below,
which is displayed by pressing the NAV key. To select a function from this
menu, place the cursor over the desired function and press the ENT key.
NAVIGATION MENU 1
9.1 TRIP PLANNING
Waypoint/Route Selection From Waypoint To Waypoint
Speed Time
Distance Bearing
TRIP PLANNING PAGE
The Trip Planning Page allows you to calculate the distance, bearing, and
time requirements between any two waypoints or for any programmed route.
To perform trip planning between two waypoints...
• Use the CLR key to select “WPT” on line 1.
• Enter the from waypoint. If you wish to use your present position,
leave it blank.
· Enter the to waypoint. If you wish to use your present position, leave
it blank.
· The speed field will display your present speed. You may enter a
9-1
To Next Page
Loading...
Need help?
General
