ADL300 - Fast installations and commissioning Pag. 26 of 52
5.1.2 Meaning of LEDs
The LED is lit when the drive has activated the brake release command
The LED is lit when the drive has activated the close contactors command
The LED is lit during IGBT modulation (drive operating)
When this LED is lit the drive has reached a current limit condition. During normal functioning, this LED is off.
The LED is lit when motor speed is 0.
The LED is lit when the drive signals that an alarm has been triggered
5.2 Navigating with the optional keypad
5.2.1 Scanning of the first and second level menus
First level
First level Second level
This example is only visible in Expert mode.
5.2.2 Display of a parameter
(1) Reference to the menu where the parameter is to be found (in this case menu 14 - MOTOR DATA)
(2) Position of the parameter in the menu structure (01)
(3) Description of the parameter (Rated voltage)
To Next Page
Loading...
Need help?
General