Flying Shear for Roll Forming machines – Instruction manual Pag. 23 / 29
Acceleration ramp for jog command.
Deceleration ramp for jog command.
26.06 Homing
This function allows the parameters for defining the zero point to be set.
Parameter that detects the first direction of the zero-position search when the POS 0
Search command is activated (DIGITAL INPUTs menu).
The motor turns clockwise.
The motor turns counter clockwise.
Source of the zero-search command.
Source of the zero sensor.
Parameter that sets the activation edge of the zero sensor.
The zero sensor is active on the rising edge.
The zero sensor is active on the falling edge.
Parameter that enables/disables index search (rotation pulse, zero mark) of the
position encoder during zero search.
Speed reference for zero-sensor search.
Speed reference adopted during the search for the absolute zero position.
This reference is applied when the zero sensor is activated and/or in encoder index
search phase.
Acceleration ramp for Homing command.
Deceleration ramp for Homing command.
Destination of the zero-search status monitor.
To Next Page
Loading...
Need help?
General