Gerber Technology GERBERplotter Infinity Series User Manual

8
English
3 – Paper Supply Mandrel
The paper supply mandrel holds the roll of paper that will be used to
plot on. The paper supply mandrel is adjustable so that different
widths of paper may be used.
4 – Paper Take-up Mandrel
After a plot is complete, the Infinity plotter can either drop the plot
onto the floor or wind it up onto an unused paper core. The paper
take-up mandrel is driven by a motor and is used to wind the
completed plot onto the paper core.
5 – Bulk Ink Cartridge
This pressurized cartridge holds the ink for the Infinity 85 plotter.
Access Pens must be pushed before removing the bulk ink
cartridge. Failure to comply could result in the discharge of ink from
the pressurized bulk ink cartridge.
6 – Control Panel
The control panel is used to provide direct control over the Infinity 45
and the Infinity 85 plotters.
Figure 2. Control Panel
Key to Figure
1-Menu Display, 2-Select (make menu choice), 3-Online (toggle
online/offline), 4-Cancel (clear plotter memory/return head to parking
station), 5-Plotter I/O (On/Off) Switch (turn plotter on and off),
6-*Access Pens (Toggles head between parking station and safe
location where cartridges can be replaced), 7-Paper Advance
(advance paper), 8-Menu (sequence through menus)
Infinit
y
45 Infinit
y
85
6
7
8
1
2
3
4
5
5
4
6
7
3

Gerber Technology GERBERplotter Infinity Series Specifications

General

Brand	Gerber Technology
Model	GERBERplotter Infinity Series
Category	Plotter
Language	English