Gerber Technology GERBERplotter Infinity Series User Manual

39
English
7. Continue advancing the paper until the leading edge (1)
wraps around the roll (2) and tucks under by at least 3
inches (76 mm) without wrinkling. Make sure the paper is
flat on the platen or it may touch the inkjet cartridges
when installed.
Figure 27. Wrapping Supply Paper Around Introduction
Key to Figure
1-Leading edge of paper, 2-Take-Up Roll
8. Open the Parameter Control Screen
on the Infinity Interface, select the Paper tab, and click on
the New Paper Roll button.
Note: For more information, refer to the
Accessing Screens section of Operating
the Infinity GERBERplotter.
1
2

Gerber Technology GERBERplotter Infinity Series Specifications

General

Brand	Gerber Technology
Model	GERBERplotter Infinity Series
Category	Plotter
Language	English