GOLDONI MY SPECIAL SR Series User Manual

The PTO is engaged by means of the PTO
lever and, when the machine is at a standstill,
with the Gear Stop raised.
The tractor is equipped with a rear power take - off
able to function in the following mode:
● Independent.
By using the lever the following speeds are
possible:
540 - 890 rpm with 3000 engine rpm
● Synchronized
Synchronised with all gears.
These are the revolution of the PTO for every
wheel revolution
Ratio - 4 , 1: 1
POWER TAKE-OFF
Power take - off (PTO)
WARNING
when the PTO is not used, move the
mode selector lever to the Neutral or
Independent position (depending on
the model or version). This prevents
the shaft of the PTO and other spinning
components from accidentally turning.
WARNING
Whenever the PTO is not in use, the
drive shaft must be covered by the
special guard.
Counter - clockwise rotation
Power take - off 26 UNI 220 profile
Implement hitching lever
PTO shaft guard.
IMPORTANT
The two - wheeled tractor is equipped
with a safety device that prevents the
reverse gear from being engaged when
the PTO is engaged, in the normal
operating direction. Set the PTO to the
neutral position before engaging the
reverse gear.
GOLDONI S.p.A.
MY SPECIAL SR
EN Inglese
102
OPERATING INSTRUCTIONS

GOLDONI MY SPECIAL SR Series Specifications

General

Brand	GOLDONI
Model	MY SPECIAL SR Series
Category	Tractor
Language	English