The throttle lever is located in the front right
-
hand
side of the machine.
Increase or decrease the engine rate by gradually
moving the lever.
●
Allow the engine to idle.
●
Release the Gear Stop lever.
●
Select the transmission ratio (consult the
Gearbox chapter).
●
Gradually depress the Gear Stop lever to
disengage the (safety) linkage in the
device.
●
Gradually accelerate the engine.
●
Allow the engine to idle.
●
Release the Gear Stop lever.
●
Move the gearshift lever to the idle position.
● Remember to disengage the PTO if used.
DANGER
The machine could respond in a
dangerous way if the Gear Stop lever is
depressed too sharply.
IMPORTANT
Before starting the machine, make sure
you become familiar with its main
controls: transmission, PTO, diff lock,
how to stop the engine and the Gear
Stop.
IMPORTANT
Lengthy clutch disengagements could
wear out the thrust bearing.
To Next Page
Loading...
Need help?
General