Comply with the following instructions
before using the machine for the first time or
after a long idle period:
● Make sure that the machine is not
damaged in any way.
● Check the mechanical components,
which must be in a good condition with
no signs of rust.
● Carefully grease all mobile parts.
● Make sure that there are no oil leaks.
● Check the engine oil level.
● Check the transmission oil level.
● Make sure that all the protections are in
their correct places.
● Stop the machine on level ground, not
on a slope. Fit a chock under the
wheels if necessary.
● Disengage PTO and stop the
attachments.
● Lower the implements to the ground.
● Turn off the engine and if the ectrical
start is present, remove the ignition
key.
● Wait until the engine and all moving
parts have stopped before you leave
the operator
’
s station.
● Close the fuel shut
-
off valve if the
machine is equipped with this
component.
To Next Page
Loading...
Need help?
General